Starlink Gen 3 Extension Roof Mount - Extended Height Installation Kit

Starlink Gen 3 Extension Roof Mount - Extended Height Installation Kit

Elevate your Starlink Gen 3 dish above obstructions with the Starlink Gen 3 Extension Roof Mount. Featuring extended height pole, weather-resistant construction, adjustable tilt angles, and reinforced stability for elevated installations. Perfect for clearing trees, buildings, chimneys, and other obstacles that block satellite visibility. Professional-grade solution for optimal signal strength.

Extension Roof Mount Features:

• Extended height pole (48" total height)
• Clears trees, buildings, and obstructions
• Heavy-duty reinforced construction
• Weather-resistant powder-coated steel
• Adjustable tilt angle for optimal alignment
• Guy wire support system for stability
• Universal roof compatibility
• Complete hardware kit included

Extended Height Design

The 48-inch extended pole elevates your Starlink dish 2-4 feet higher than standard roof mounts, providing the extra height needed to clear nearby trees, adjacent buildings, chimneys, roof peaks, and other obstructions. The additional elevation ensures unobstructed view of the sky for maximum satellite visibility and signal strength.

Clear Obstructions

Many installations face challenges with trees, neighboring structures, or roof features blocking satellite line of sight. The extension mount solves these problems by raising the dish above obstacles. Use the Starlink app to identify obstructions, then install the extension mount to achieve clear sky visibility in all directions.

Reinforced Heavy-Duty Construction

The extended height requires extra structural support. This mount features reinforced steel construction with thicker walls and larger diameter pole compared to standard mounts. The robust design handles the increased wind load and leverage forces that come with elevated installations. Engineered for long-term stability and safety.

Guy Wire Support System

Included guy wires and tensioning hardware provide additional stability for the extended pole. The three-point guy wire system distributes wind loads and prevents swaying or vibration. Adjustable tensioners allow you to fine-tune stability. The guy wires are essential for safe, code-compliant elevated installations.

Weather-Resistant Construction

Premium powder-coated steel construction resists rust, corrosion, and UV damage for years of reliable outdoor use. The durable finish withstands extreme temperatures from -40°F to 140°F, heavy snow loads, ice, rain, and coastal salt air. Built to last in the harshest climates without degradation.

Adjustable Tilt Angle

The adjustable mounting bracket allows you to set the optimal tilt angle for your Starlink dish based on your latitude and roof pitch. Fine-tune the angle to maximize satellite visibility and signal strength. The secure locking mechanism holds the dish firmly at your desired angle without slipping.

High Wind Resistance

When properly installed with guy wires, the system withstands wind speeds up to 90 mph. The guy wire support system dramatically increases wind resistance compared to unsupported poles. The low-profile dish design minimizes wind resistance while the robust construction ensures stability during storms.

Universal Roof Compatibility

The versatile mounting system works with all common roof types including asphalt shingles, tile, metal roofing, and flat roofs. The adjustable base plate accommodates different roof pitches and materials. Multiple mounting points distribute weight and stress for secure installation on any roof structure.

Complete Hardware Kit

Everything you need for professional installation is included: extended mounting pole, reinforced base plate, guy wires with tensioners, lag bolts, washers, roof sealant, flashing, cable clips, and detailed installation instructions. Premium-grade fasteners ensure long-term holding power and safety.

Waterproof Seal

The included flashing and premium roof sealant create a watertight seal around all mounting bolts to prevent leaks. The flashing integrates with your existing roofing material to channel water away from penetration points. Proper installation ensures your roof remains leak-free for years.

Cable Management

The mount includes cable clips and routing channels to secure the Starlink cable along the extended pole and across your roof. Proper cable management prevents wind damage, UV degradation, and maintains a professional appearance. UV-resistant cable ties keep everything neat and protected.

Professional Installation Recommended

Due to the extended height, guy wire installation, and multiple roof penetrations, professional installation is strongly recommended. A qualified installer ensures proper structural support, waterproofing, building code compliance, and safety. The investment in professional installation protects your roof and ensures optimal performance.

Building Code Compliance

Designed to meet or exceed local building codes for elevated roof-mounted equipment when installed according to instructions with proper guy wire support. The engineering accounts for wind loads, snow loads, and structural requirements. Check local regulations as some areas may require permits and engineering approval for elevated mounts.

Optimal Signal Performance

The elevated position provides superior satellite visibility compared to ground or standard roof mounts. Clearing obstructions results in faster speeds, lower latency, and more reliable connectivity. The investment in an extension mount pays dividends in improved internet performance.

Perfect For:

• Properties with trees blocking satellite view
• Homes near taller buildings or structures
• Installations with chimney or roof peak obstructions
• Wooded or forested areas
• Dense urban environments
• Locations requiring maximum signal strength
• Professional installations
• Challenging installation sites

Safety Considerations

Working at heights with extended poles requires proper safety equipment and training. Use fall protection, secure ladders, and work with a partner. Consider hiring a professional installer if you're uncomfortable working at heights or if your roof has steep pitch or special requirements.

Technical Specifications:

• Material: Heavy-duty powder-coated steel
• Finish: Weather-resistant powder coating
• Total pole height: 48 inches (4 feet)
• Pole diameter: Compatible with Starlink Gen 3 dish
• Roof compatibility: Shingle, tile, metal, flat roofs
• Tilt adjustment: 0-45 degrees
• Wind rating: Up to 90 mph with guy wires properly installed
• Guy wires: 3-point support system with tensioners
• Temperature range: -40°F to 140°F (-40°C to 60°C)
• Weight capacity: Supports Starlink Gen 3 dish (9.2 lbs) plus snow/ice load
• Base plate: 16" x 16" reinforced steel
• Mounting hardware: Heavy-duty lag bolts, washers, anchors
• Flashing: Weatherproof roof flashing included
• Sealant: Premium roof sealant included
• Weight: 3.5 kg (7.7 lbs)
• Warranty: 1 year manufacturer warranty

What's Included:

• Extended 48" mounting pole
• Reinforced roof mounting base plate
• Guy wire support system (3 wires with tensioners)
• Heavy-duty lag bolts and washers
• Roof flashing
• Premium roof sealant
• Cable clips and routing hardware
• Guy wire anchors and hardware
• Installation template
• Detailed installation instructions

Tools Required (Not Included):

• Power drill with bits
• Socket wrench set
• Caulking gun
• Ladder and fall protection equipment
• Stud finder
• Level
• Wire cutters
• Measuring tape

Professional Installation Service:

For guaranteed safe installation, proper guy wire tensioning, and leak-free waterproofing, consider our Professional Starlink Installation Service (sold separately). Our certified technicians have the expertise, equipment, and insurance to handle elevated installations safely and correctly.

Elevated performance. The Starlink Gen 3 Extension Roof Mount provides 48-inch extended height, guy wire stability, weather-resistant construction, and complete hardware to clear obstructions for optimal satellite visibility.